Saturday, May 16, 2009

Sunday, April 19, 2009

Mounting tips and techniques

No matter what base you use for mounting your artwork you should always do the following;

1. If you need to cut images out use a scalpel and a RULER.
2. Make sure all your edges are straight and corners are at right angles.
3. Mark out on the board with a ruler where your page will sit.
4. Put one strip of double-sided sticky tape on the left and right edges of the card (for landscape, top and bottom for portrait).
5. Peel away the covering of one of the strips to reveal the sticky edge.
6. Stick one edge of the paper down in place.
7. Once one edge is in place, stake the coating of the other edge of double sided tape.
8. Before you stick the page down, spay Spray Adhesive on the card and gently lay the paper on the card.
9. Using the back of your hand smooth the paper onto the card and double sided tape (make sure there are no air bubbles).
10. Let your board dry.

Once you have finished, write you name and student number on the back of each board.

Now you are ready to start designing!

Printing Colour...

Colours will always be different from computer to computer, monitor to print. Your monitor displays colour as RGB although most inkjet printers (and commercial printers) use CMYK colour.

If you remember from earlier this semester, printing in CMYK will have a more dull effect than RGB colour. This is why it is so important to ALWAYS PRINT A SAMPLE of your work so you can get your colours correct (this becomes more important when you are matching colours to fabrics, threads and pantones). It is always difficult to achieve exact colour matches.

To achieve the best results use…

- The best quality printer available to you.

- The correct paper for the job – there are a wide variety of paper types and qualities for printing e.g., at UTS select from the samples provided or for other printers (home or professional) select from standard inkjet paper, photographic paper, glossy paper etc.

- The correct printer settings to match the print job.

- Try printing your images small on one page in both RGB and CMYK to check which is the best one for the job.


NOTE: Commercial printers (and UTS) require you to save a copy of your artwork as a .PDF file to use with their printers.

It is easy to save files as .PDF. Simply select ‘save as’ and select .PDF in the dropdown menu (just like you would for saving files as .jpeg).

Before you start printing....

Saving Files….

It is great practice to save your work at regular intervals:

- Use save or save as. This saves a copy of the artwork in it’s native file format (the format the file was created in, eg; Photoshop files are saved as .psd in their native format.

- Make all changes to the image in its native format before you ‘save’ or ‘export’ to another format (non native) eg; .jpeg when saving for your Blog.

- Flattening images to create smaller file sizes and quicker prints.

- Once you have finished your artwork and are ready to print you should flatten your work in Photoshop.

- Save a new flattened copy in your ‘Finished Artwork’ file.

- The file with all the layers intact should be kept as a working file. You can make more changes if you feel like it from your working file.

Flattening images:

- When you have finished an artwork it can then be flattened – this creates a single layer ( merging all the layers together to create a single backround layer).

- Flattening reduces file sizes.

- Once flattened the image cannot be edited or manipulated further

Sunday, April 5, 2009

Starting to create dynamic Concept Boards…


1. Use your ‘Architectonic’ file management system to choose where you will save your images and work for your concept boards.
2. Create a new file in Photoshop that is A3 size (portrait or landscape). Check the resolution of your new file and make sure it matches your image resolution. Also select your colour mode (RGB).
Remember you can do anything within this A3 area. Your options are endless. As long as you can print A3, any shapes and layouts are fine.
3. Choose your foreground and background colour.
4. Open the images you intend to use.
5. Fix the quality of the images (Brightness & Contrast, Colour, Cropping etc).
6. Now you have your images you can start to use the rulers and guides to lay your images out in creating ways on the board. (Remember to keep it clear and simple. You want to express the mood in your visuals so make sure they are of high quality).
7.Choose your type (font). Resize, manipulate, scale and rasterise as desired.
8. Use the layers as much as you can to lay your images out. If all the images are on separate layers you can manipulate them individually if you need to.
9. Once you are happy with your layout, save the file as a .psd and a copy as .jpeg in your filing system. (Flatten the image before saving as a .jpeg, explained in week 7 class. Flattening creates a smaller file size for printing).
10. Print a colour sample/test sheet.
11. Adjust colours as desired (colour balance, brightness & contrast).
12. Re print a test page, if you are happy your colours are correct you can now print the final product.
13. Trim and mount on card.
14. Put your name and student number on the back.


Rulers & Guides.....


When you start the layout for your concept boards you should always make sure you have the rulers (guides) showing so you can enable precise positioning of images on your boards or presentations.

Rulers and Guides are non-printing and can be displayed or hidden.


To show Rulers click on ‘Window’ in the Menu Bar> Show Rulers.


Ruler measurements are shown on the ‘X’ and ‘Y’ axis. You can set rulers at 0 to match the corner of your page by dragging the ‘X’ and ‘Y’ axis from the little box in the top left hand corner of the Rulers Guide.

Drag the axis to the corner of your page. Now the numbers of the rulers start from ‘0’ so you can measure exactly where your images should go on your page.

To show ‘Guides’ in your work area simply drag guides from the ‘X’ and ‘Y’ axis to the position you want and let go.

The guide will stay in position. If you need to move the ruler simply move it around using the move tool.

To hide guides select ‘View’ in the menu bar and then click ‘Hide Guides’.

For extra precision select ‘View’ in the menu bar, ‘Snap To’>’Guides’.

This means that when you position your image next near your guide it will automatically snap (position itself) on your ‘Guide’ line.

Friday, March 13, 2009

Scanning Tips



Before Scanning:


-Have an idea of what the scan is going to be used for. This will determine the resolution you use. Eg. If you are only scanning an image for your blog, scan at 70-80dpi.

- Use Gloss images over Matt.

- Group similar images together when scanning. Eg. Dark images, magazine scans, fabrics together etc. This helps to determine resolution and colour mode and insures consistency within your scans.

- Line Drawings (DDS) make sure all your lines join. This will help you colour and fill images in Photoshop without having to correct the image after the scan.

- Make sure the scanner is clean.

- Always keep an original of your scan just like a photo negative.

- Always save scans as a .psd (photoshop file) these files never loose clarity.

- Always save a new copy of the scan when you want to use it in a presentation or altering the image in Photoshop.

- Watch out for moirĂ© effect and use ‘descreen’ where necessary.


REMEMBER:

Great images are great from the moment they are captured be it on a camera or scanner. It is always better to start with a GREAT image than trying to alter a good one in Photoshop.

Moire Patterns


















When you scan a magazine image, newspaper, fabrics or any other printed image , moire patterns are often unintentionally created.

Always look out for these patterns when you scan. At UTS, the scanners automatically reduce the Moire.
If you scan at home you may have a Descreen button which will reduce the risk of this pattern appearing.


Note: Do NOT use the Descreen filter when scanning real photographs


1. Moire Pattern Scan 2.Descreen Scan
Images from: http://users.ecs.soton.ac.uk/km/imaging/course/moire.html


Thursday, March 5, 2009

Speaking of Layout.....

I think this image speaks for itself.

Friday, February 27, 2009

And in the beggining there was....The Concept Board.

When you create a Concept Board you are ultimately creating a place to collaborate all your stimulus material, comprising of visual and/or text representations of your ideas based on a chosen concept that will inform you design. The Concept Board works simultaneously with the research you do based on your concept/brief. One is written expression and the other is visual inspiration and stimulation. Concept Boards are usually mounted on large boards so a group of people can easily see them. For Digital Fashion Communication you will be creating 3 Concept Boards that are A3 size. Concepts Boards can be quite polished like advertisements (movie posters etc), or they could be rough and look unfinished depending on what mood you would like to create as a response to your concept.


I showed you some examples of Concept Boards in class which are a representation of a highly creative concept board. Below are examples of Collage and Template based Concept Boards both created for an online store selling baby clothing and accessories. Notice how the visuals are laid out and constructed on the page.


Example 1: Collage


Example 2: Template


EXERCISE:

Which layout do you think best suits the concept and why? How would you make these boards better?

(Please use the comment function to express you thought about these two Concept Boards).


One website that I found that will help you immensely with your understanding of Concept Boards is:


I recommend that you all visit this site as part of your research for this class.

Have fun guy's!

Later L

Lesson 1 - The Recap

Wow, what a fantastic start to Didital Fashion Communication. I have sifted though all your postings and have already found out about so many new and interesting ideas, exhibitions and websites. Keep it up guy's, this is going to be great!

Ok, so lets get stuck into it. I thought I would give a little recap about what we talked about in Lesson 1. So we got familiar with the Uniot Outline, we discussed what Fashion Communication means and how it is important for visually representing ideas and concepts, I gave small demonstrations of how to navigate a MAC computer, then we talked about using a Blog as a digital visual diary.


Later L.