No matter what base you use for mounting your artwork you should always do the following;
1. If you need to cut images out use a scalpel and a RULER.
2. Make sure all your edges are straight and corners are at right angles.
3. Mark out on the board with a ruler where your page will sit.
4. Put one strip of double-sided sticky tape on the left and right edges of the card (for landscape, top and bottom for portrait).
5. Peel away the covering of one of the strips to reveal the sticky edge.
6. Stick one edge of the paper down in place.
7. Once one edge is in place, stake the coating of the other edge of double sided tape.
8. Before you stick the page down, spay Spray Adhesive on the card and gently lay the paper on the card.
9. Using the back of your hand smooth the paper onto the card and double sided tape (make sure there are no air bubbles).
10. Let your board dry.
Once you have finished, write you name and student number on the back of each board.
Now you are ready to start designing!
Sunday, April 19, 2009
Subscribe to:
Post Comments (Atom)

No comments:
Post a Comment